2017 Harvest Update- Things Are Starting To Pick Up in the Garden

After I attended the online garden planning course hosted by Peterson Garden Project, I realized that it was about time to start seedlings for the spring harvest.  I honestly don’t know if I’m starting too early or not; however, I’m operating on the mantra of, “Do it, then figure it out along the way.”  At worst, they fail.  At best, the timing for transplanting will be perfect.  Either way, I’m going to learn something and get experience, which is what this whole process is about.


Follow the farm on social media

Twitter

Youtube

Steemit


Here is how I went about getting everything done:

First I put my jiffy pellets in a pyrex dish.  Then I warmed up the water used to expand the jiffy pellets (I held off on boiling the water on the chance that it would kill off any beneficial nutrients in the peat mix.)

20170413_211643


Once I poured the water over the pellets and into the dish, I waited for the pellets to fully expand, then transferred them to the grow trays.

20170413_213447

On the advice of an experience nursery gardener, I opted to use 10-pellet trays since they would provide a greater deal of flexibility with germination:

  • I don’t have to plant 24, 36, or 48 of one thing at a time
  • Being that each tray has the same plant, they will germinate at the same time and the same rate, which makes timing with germination and transplanting easier (ie, I won’t have a half-empty tray filled with slower-germination plants.)
  • They take up less space and have more flexibility for configuring on warming mats and underneath grow lights

Once I had the pellets loaded into the trays, I used a pencil to push down the center of the pellet to the prescribed planting depth (between 1/4″ and 1/2″ for beets, carrots, cilantro and radishes I planted.)  I then put two seeds in each pellet (to increase the odds of germination occurring in each pellet, with the exception of the carrots, which themselves came in a pellet form.  Even with an 85% germination rate, I figured I’d take a chance on one-per.)

20170413_214739

After placing the seeds in each pellet, I gently used my fingers to pinch and push down the peat at the top of the pellet.  Then I placed the the trays in the window, utilizing my grandmother’s old sewing machine table (sorry and thank you!)

20170413_215935


Now that the seeds have been planted, the next step is to log the information on to a spreadsheet to track the progress, and germination success and growth rate of each plant.

20170413_215327

plant chart


I also started the next batch of ginger for sprouting.  I had a plastic tray with slots big enough to fit each ginger cutting.  I’ve found that they sprout faster when using a heating mat.

These will probably sprout shoots in 10-14 days.  Once leaves come out, I’ll transplant them to the larger planter where they will grow for the next 8 months to maturity.


For the next step, I’ll plant the seedlings for the modular planters on the deck.  For that, I’ll have to buy some more 10-pellet trays.  I’m not sure if I’ll place those under the grow lights since the outdoor temperatures are getting warm enough to place outside.  If I had an outdoor greenhouse, I would place them in there.  (That said, it might be worth investing in a small store-bought one.

 

Advertisements

Progress Report – Custom-Made Planters and a Logo

The construction progress on the planters is going a little slower than expected.  Seems all the other events of life is requiring attention.

Same goes for the logo.  I had an exact image of what I wanted, but the Fiverr designer could not deliver (partially due to software limitations.)  I decided to cut my losses (and retain my sanity) and accept the design as best he could manage.

I’ve since reached out to a closer network of people in my soccer supporter community for help cleaning up the design.  As for the planter, with the time it’s taking, I figure I’m going to settle with a version that’s less than what I envisioned, but should function just as well.

Construction Project – Modular Box Planters (update #3)

After my start-and-stop experience of attempting to cut the wood for the planters in an off-the-cuff manner, I realized that I would have to do some planning before I began cutting.  The good thing is that increments of 8, 12 and 16 fit well on a 48″x96″ plywood sheet.

As you can see in the picture below, I’ve mapped out my cuts based on size and overall number of pieces needed.  I feel like I’ll be taking a leap of faith, hoping everything goes to plan.  I guess we’ll find out soon enough.  (Hey, I never claimed to be a good carpenter. =)  )

 

Construction Project – Box Planters (update #2) – Feb 5, 2017

Got the plywood.  For this project, I’m using CCX treated plywood.  As I’m planning to use an inner liner as well as stain and seal the wood using a polyurethane clear coat, I’m hoping that these will last at least 3 years (though hopefully by that point I’ve got a home base with an in-ground garden.)

Enjoy.

 

(The Boy insisted on being in the photo, so who was I to argue?)

 

Construction Project – Box Planters (update) – Feb 2, 2017

For 2017, I’m making some modular gardening boxes that I’ll have stationed on the south-east corner of my deck, where I can take the most advantage of sunlight exposure.

These are the fastening bolts that I’m going to use to join the boxes sides together.

I think once I have all the materials together, I’ll do a more comprehensive post.  For now, the excitement of all the pieces arriving is too much to keep contained.

Enjoy.